|
Exxon
Mobil |
|
Optema
EMA CoPolymers (Sealing and Adhesion Applications ) |
| TC110 |
EXACT
0201 is an ethylene octene copolymer produced ® using ExxonMobil
Chemical's EXXPOL Technology.EXACT 0201 is designed for use in both
monolayer and multilayer industrial blown film applications requiring
outstanding sealability and toughness. |
| TC113 |
OPTEMA TC-113 is an ethylene methyl acrylate copolymer which can be used
as an impact modifier or compatibilizer in polymer compounds. It can
also be used in coextrusions where adhesion and thermal processing
stability are required or as an
elastic, tough monolayer film with the addition of additives to allow
handling. It has been compounded and processed on typical LDPE
compounding equipment at temperatures up to 625.F. |
| TC114 |
OPTEMA TC-114 is an ethylene methyl acrylate copolymer specifically
formulated to offer extrusion and property performance for blown film
applications. It produces a soft, elastic film with good handling
characteristics without additional additives. It can produce film under
1.0 mil thickness. |
| TC115 |
OPTEMA TC-120 is an ethylene methyl acrylate copolymer which can be used
for extrusion lamination and co extrusion applications engineering
thermoplastics. It has been processed at temperatures up to where good
interlayer adhesion between polyethylene, polypropylene, nylon,
polycarbonate, PVDC, and other substrates is required. It can also be
used as a heat seal layer in co extrusions and extrusion coating, but
additional additives or process modifications may be required to prevent
chill roll sticking. It has been processed at temperatures up to 625..F
without degradation or gel formation. |
| TC120 |
OPTEMA TC-120 is an ethylene methyl acrylate copolymer which can be used
for extrusion lamination and co extrusion applications engineering
thermoplastics. It has been processed at temperatures up to where good
interlayer adhesion between polyethylene, polypropylene, nylon,
polycarbonate, PVDC, and other substrates is required. It can also be
used as a heat seal layer in co extrusions and extrusion coating, but
additional additives or process modifications may be required to prevent
chill roll sticking. It has been processed at temperatures up to 625..F
without degradation or gel formation. |
| TC130 |
OPTEMA TC-130 is an ethylene methyl acrylate copolymer which can be used
for making blends and compounds or can be injection molded where
softness and flexibility are required. |
| TC140 |
OPTEMA TC-140 is a high flow ethylene methyl acrylate copolymer which
can be used in specialty polymer applications such as melt blown
nonwoven or hot melt adhesive formulations. It has been processed up to
625....F without degradation or gel formation. |
| TC220 |
OPTEMA TC-220 is an ethylene methyl acrylate copolymer which can be used
for making alloys, blends, and compounds, or be injection molded where
softness and flexibility are required. |
| TC221 |
OPTEMA TC-221 is an ethylene methyl acrylate copolymer which can be used
for making alloys, blends, and compounds, or be injection molded where
softness and flexibility are required. |
Industry
Info