Industry Info

Facts & Figures
(Including Plant Capacities)

Technical Datasheets

Links

Industry Info

EXCEED™ LDPE
LD 600 BA (Low Density Polyethylene for injection molding applications)
Key features	Recommended film extrusion conditions
LD 600 BA is a high flow LDPE resin, characterized by high stiffness and good toughness. Because of its easy processability, it is typically used for rigid medium sized moldings, domestic houseware, food containers, technical parts, toys, caps and bottle closures.	Cylinder temperature :160 -240°C Mould temperature : 15 -50 °C

Typical values
General properties	Test Method(based on)	Unit	Typical Value³
Melt Index	ASTM D 1238	g/10 min	20.5
Density	ASTM D 2839/1505	g/cm³	0.924
Melting Point(DSC)	ASTM D 3418	°C	109
Crystallization Point (DSC)	ASTM D 3418	°C	95
Vicat Softening Point (DSC)	ASTM D 1525	°C	91

Mechanical Properties
Tensile Strength at Break	ASTM D 638	MPa	11
Elongation at Break	ASTM D 882	%	125
1 % Secant Modulus	ASTM D 638	MPa	1900
Shore Hardness - D (15 sec)	ASTM D 2240		48