Industry Info

Facts & Figures
(Including Plant Capacities)

Technical Datasheets

Links

Industry Info

EXCEED™ LDPE
LD 605 BA (Low Density Polyethylene for injection molding applications)
Key features	Recommended film extrusion conditions
LD 605 BA is a general purpose grade, characterized by good stiffness and good toughness. Because of its easy processability, it is typically used for rigid medium sized moldings, domestic houseware and food containers.	Cylinder temperature :160 -240°C Mould temperature : 20 -50 °C

Typical values
General properties	Test Method(based on)	Unit	Typical Value³
Melt Index	ASTM D 1238	g/10 min	6.5
Density	ASTM D 2839/1505	g/cm³	0.924
Melting Point(DSC)	ASTM D 3418	°C	111
Crystallization Point (DSC)	ASTM D 3418	°C	96
Vicat Softening Point (DSC)	ASTM D 1525	°C	93

Mechanical Properties
Tensile Strength at Break	ASTM D 638	MPa	11
Elongation at Break	ASTM D 882	%	100
1 % Secant Modulus	ASTM D 638	MPa	200
Shore Hardness - D (15 sec)	ASTM D 2240		50