Industry Info

Facts & Figures
(Including Plant Capacities)

Technical Datasheets

Links

Industry Info

EXCEED™ LDPE
LD 615 BA (Low Density Polyethylene for injection molding applications)
Key features	Recommended film extrusion conditions
LD 615 BA is a medium flow LDPE resin,characterized by high stiffness and good toughness.Because of its melt-index , it is typically used for tough medium sized containers, food containers, houseware, technical parts and bottle closures.	Cylinder temperature :160 -240°C Mould temperature : 20 -50 °C

Typical values
General properties	Test Method(based on)	Unit	Typical Value³
Melt Index	ASTM D 1238	g/10 min	15
Density	ASTM D 2839/1505	g/cm³	0.922
Melting Point(DSC)	ASTM D 3418	°C	106
Crystallization Point (DSC)	ASTM D 3418	°C	91
Vicat Softening Point (DSC)	ASTM D 1525	°C	88

Mechanical Properties
Tensile Strength at Break	ASTM D 638	MPa	11
Elongation at Break	ASTM D 882	%	120
1 % Secant Modulus	ASTM D 638	MPa	190
Shore Hardness - D (15 sec)	ASTM D 2240		46