Industry Info

Facts & Figures
(Including Plant Capacities)

Technical Datasheets

Links

Industry Info

ExxonMobil^®LLDPE
LL 1030 XV (Linear Low Density Polyethylene for blown film applications)
Key Features	Recommended blown film extrusion conditions
LL 1030 XV is an LLDPE grade, offering excellent mechanical properties combinedwith high draw down and good gloss. LL 1030 XV is typically used in heavy duty sacks, refuse sacks and shrink film.	Blown film : Melt temperature : 180 - 220 °C High blow-up ratio ss For extrusion of 100 % LLDPE or LL-rich blends on unmodified equipment or through narrow die gaps (<1.2 mm), it is advisable to add PPA masterbatch to prevent melt fracture.

	Antiblock (ppm)	Slip (ppm)	Thermal Stabilizer
LL 1030 XV	-	-	+
(*) High stabilizer level for cast film

Typical values
General properties	Test Method (based on ASTM)	Unit	Typical Value
Melt Index	D 1238	g/10 min	0.5
Density	D 1928/4883	g/cm ³	0.918

Film properties
Tensile Strength at Break	MD/TD	D 882	MPa	34 / 32
Elongation at Break	MD/TD	D 882	%	700 / 840
1 % Secant Modulus	MD/TD	D 882	MPa	190 / 220
Gloss (60° angle)		D 2457	%	11
Clarity		D 1746	%	60
Dart Drop Impact (A/Face)s		D 1709	g/µm	4.5
Trouser Tear Strength	MD/TD	D 1038	g/µm	22 / 22
Elmendorf Tear Strength	MD/TD	D 1922	g/µm	2.5/13