| Grade |
MFI |
Product Atributes |
Applications |
| F 110 |
10.0 |
High Clarity, High Stiffness & Toughness with Antistat
& Antiblock |
TQ Films |
| F 102 |
1.8 |
High Clarity, High Strength & Toughness with Antistat |
BOPP Metallizable Grade |
| F 102S |
1.8 |
High Clarity, High Strength & Toughness, Mildly Co-Polymerised |
BOPP Non-Metallizable Grade with Soft Feel |
| R 103 |
3.0 |
Easy Processability, High Tenacity & Toughness with Low
Water Carryover |
Raffia |
|
PP
HOMOPOLYMER - INJECTION MOULDING |
| M 110 |
10.0 |
Easy Processability, Good Gloss, Low Cycle Time |
General Purpose - Injection Moulding |
|
PP
RANDOM COPOLYMER - MOULDING GRADES |
| M 210S |
10.0 |
High Clarity, High Stiffness, Low Cycle Time |
Transparent Containers & Products - ISBM Applications,
FDA Complaint |
| B 202S |
1.8 |
Wide Process Window |
Transparent Blow Moulded Products, USP Complaint |
|
PP
HETEROPHASIC COPOLYMER |
| E 301 |
0.8 |
Easy Processability, Low Inversion, High Gloss |
Sheet Extrusions & Thermoforming |
| M 304 |
3.5 |
Easy Processability, Low Cycle Time |
General Purpose Injection Moulded Product with Good Impact
Stiffness Balance |
| M 312 |
12.0 |
Easy Processability, Low Cycle Time |
General Purpose Injection Moulded Product with Good Impact
Stiffness Balance |
|
PP
- SPECIAL GRADES |
| E 125 |
25.0 |
Specially Developed Grade with Low Water Carryover &
Excellent Tenacity |
Extrusion Coating on Woven Fabrics and Allied Substrates |
| Y 132 |
32.0 |
Specially Developed Grade with Low Water Carryover &
Excellent Tenacity |
Fibres & Non-wovens |
| Z 225S |
25.0 |
High Flow, Excellent Rigidity, High Clarity |
TWIM & ISBM Applications - FDA Approved |
| B 202S |
1.8 |
High Melt Strength, High Clarity |
Blow Moulding of Medical Applications |
| M 412 |
12.0 |
Easy Processability, Very Good Stiffness, Impact Balance |
Automotive / Luggage Shell Moulding |
| M 408 |
8.0 |
Easy Processability, Very Good Stiffness, Impact Balance |
Automotive / Luggage Shell Moulding |
| M 408 S |
8.0 |
Super High Impact Resistance |
Speciality Grade for Automotive / Luggage Shell |
| M 442 |
42 |
High flow, High Stiffness CR Grade |
Injection Moulding of Large Appliance Parts |
| M 470 |
70 |
Very High Flow, Medium / High Impact |
TWIM & IM of Large Products |
| M 499 |
99 |
Very High Flow, Medium / High Impact |
TWIM & IM of Large Products |
Industry
Info