|
|
|
 Industry
Info |
|
| LADENE LLDPE Film Grades
(Butene Copolymers) |
| |
| Linear Low Density Polyethylene Grades
(Butene
Copolymers) |
| |
| LDENE |
Melt Index g/10 min |
Density g/cm3 |
Applications |
Key Characteristics |
| 518N* |
0.5 |
0.918 |
Heavy duty blown film, blending
with other
resins. |
Toughness. |
| 726N* |
0.7 |
0.926 |
Medium duty stiffblown film,
blending with other
resins. |
Toughness, stiffness. |
| 118N* |
1.0 |
0.918 |
Heavy duty blown films, blown
stretch wrap,
blending with other resins. |
Toughness. |
| 118Z |
1.0 |
0.918 |
General purpose blown films of medium gauge. |
Toughness, contains medium slip & high A/B. |
| 118W |
1.0 |
0.918 |
General purpose blown gilms of
thin gauge. |
Contains high slip & high A/B,
toughness. |
| 218N* |
2.0 |
0.918 |
Medium duty blown film, blending
with other
resins. |
Toughness,
drawdownability, ease of extrusion. |
| 218Z |
2.0 |
0.918 |
General purpose blown film of medium gauge. |
Contains medium slip & high A/B
drawdownability, ease of extrusion. |
| 218W |
2.0 |
0.918 |
general purpose blown film of thin gauge. |
Contains high slip & high A/B
drawdownability, ease of extrusion |
| 218B |
2.0 |
0.918 |
Cast film for stretch warp. |
Drawdownability,
stretchability, puncture
resistance. |
| 318B |
2.8 |
0.918 |
Cast film for stretch warp. |
Drawdownability,
stretchability, puncture
resistance. |
| |
* Should be modified with slip and A/B
as required. PPA - Polymer Processing Aid. A/B
-
Antiblock |
| |
| |
|
High
Performance LLDPE Grades (HOMO Copolymers) |
| |
|
LADENE |
Melt Index g/10min |
Density g/cm3 |
Applications |
Key Characteristics |
| 6821N* |
0.8 |
0.921 |
Heavy duty blown film, blown
stretchwrap, ice
bags, blending with other resins. |
Impact
strength, tear strength. |
| 6318B |
2.8 |
0.917 |
Cast film for stretch wrap. |
Drawdownability,
stretchability, high strength,
puncture resistance |
* Should be modified with slip and A/B
as required. HAO - Higher Alfa Olefin (Hexene)
Copolymer. |
| |
|
Clarity LLDPE Grades
(Butene Copolymers) |
| |
|
LADENE |
Melt Index g/10min |
Density g/cm3 |
Applications |
Key Characteristics |
| 120W |
1.0 |
0.918 |
General purpose blown film of thin gauge. |
Contains high slip & high A/B, Toughness,
good clarity, high tack. |
| LADENE Linear Low Density
Polyethylene Injection Moulding Resins |
| |
|
LADENE LLDPE injection moulding resins are available in a variety
of melt indices and densities. SABIC engineers these resins to
exhibit very narrow molecular weight distribution. The results in a
family of PE resins that combine new levels of strength, toughness, low
warpage and high gloss.
LADENE LLDPE injection resins are designed with higher melting
points. This means quality products can be made at low cycle time,
with reduced warpage and shrinkage, while offering superior physical properties. |
| |
|
LDENE LLDPE Injection
Moulding Grades |
| |
|
LADENE |
Melt Index
g/10 min |
Density
g/cm3 |
Applications |
Key Characteristics |
| M200024 |
20.0 |
0.924 |
Housewares, lids, large part &
industrial containers, trash cans & automotive parts. |
Excellent low temperature toughness,
excellent ESCR, high gloss. |
| MG200024 |
20.0 |
0.924 |
Housewares, lids, large part &
industrial containers, trash cans & automotive parts. |
Granular resin, excellent low
temperature toughness, excellent ESCR, high gloss. |
| M500026 |
50.0 |
0.926 |
Containers, lids and deep drawing
injection mouldings. |
Excellent gloss, high flow, high
performance in fast moulding cycles. |
| MG500026 |
50.0 |
0.926 |
Containers, lids and deep drawing
injection mouldings. |
Granular resin, excellent gloss,
high flow, high performance is fast moulding cycles. |
|
|
|
